Water Inside Phone Screen? Get it out Doing this.

One of the most annoying phone problems is water getting inside your screen and damaging the electronics. But did you know that most phone screens aren’t completely waterproof? It’s not uncommon for your phone to get damp from an unexpected rain shower, or drop your phone in a sink, toilet, or pool.

But phone makers have been putting more and more technology into their phones to make them more durable and waterproof. The problem is that water under your phone screen can still cause problems.

If water has gotten under the phone’s screen, it’s a big problem. While phone manufacturers tend to make water-resistant phones (such as waterproof phones), they don’t make waterproof phones. That is, they still can be damaged by water. Some phones are resistant to random splashes or quick dunks in the water, while others are completely waterproof until a certain depth and for a specified time.

This article details what you can do if there’s water or moisture trapped underneath your phone’s screen. So, follow the steps or ways below & keep reading to find out more.

Also, we have a dedicated article on the Best ways to dry a wet cell Phone

Cut the power of your phone

If you notice moisture or water droplets trapped underneath your phone’s screen then the first thing you should do is switch off your phone and remove it from any connected outlets. This is very important as doing this might just be the difference between a small repair and buying a brand-new phone.

If this is not done as soon as possible, there is a chance that it might short-circuit the internal system and fry the motherboard. As you may know, electricity and water do not interact well; this also might lead to the phone catching on fire, causing more damage and posing a significant threat.

Cutting the power of your phone—whether overnight or when you wake up—is an easy fix that can save you some frustration, and it won’t cost you anything.

• Press and hold the power key.
• When the menu pops up, press the power off option.

Take all of the pieces off of your phone

The next thing you should do is to remove any and all removable components in your phone, such as the SIM tray, SD card tray, battery ( if it has a removable back ), etc. This will allow for more airflow into the internal parts of the phone;

If your phone develops a waterlogged problem, all may not be lost. Instead, you can salvage the situation by carefully taking all of the pieces off your phone and putting it back together. This is not as simple as it sounds, and certain phone models have additional steps to take.

If you notice any wetness around these areas, ensure you dry them off with a clean cloth. Next, you must leave your phone out to dry for at least a few hours, depending on how much moisture is inside the screen.

It’s critical that you carefully take all of the pieces off your phone, including the battery, because leaving any pieces attached can create additional problems. If you can, take advantage of a warranty repair that’s awesome. But most of the times, water damage repair isn’t covered by your warranty.

Dry your phone to remove moisture

Removing moisture from your phone’s internal components isn’t as difficult as it may seem. We’ve all experienced that sinking feeling when we drop our phone in the toilet or sink, but there are ways to remove moisture safely. Removing moisture from your phone will help remove condensation that causes your phone to fog up.

If you frequently experience this problem, removing moisture regularly will help minimize it. Just dry your phone with rice or hair drier or silica gel.

If you have dropped your phone in saltwater and want to fix it you can also read: What to Do if you Ever Drop your Phone in Salt Water

Use a Vacuum to dry your phone moisture

You can try using a vacuum on your phone to get water droplets or moisture from the phone. Keep your hand on the cup to create a suction cup around the end of the hose and keep it near the battery port, SIM card slot, and the audio jack,, which will suck out the water under the screen.

Use Rice to dry your phone

Uncooked, dry rice is amazing for absorbing moisture and drying out your smartphone from the inside out. To do this, keep all the removable pieces you removed and bury the smartphone in enough rice to cover it from the top and bottom. After this, place your smartphone and the rice in an air-tight container to ensure that the rice absorbs moisture from the phone and not from the surrounding air in the room.

 Leave the telephone inside the rice for at least a day or two before taking it out. You can also wrap the phone in a thin layer of water-absorbent cloth to prevent the rice grains from getting inside the SIM card slots. If you still notice a water spot on the phone screen, move on to the next method.

Use Silica Gel Packs on your phone

Another method you can try to draw out the moisture is using silica gel packs bundled inside some cereals and chewing gum packs. They are designed to absorb ambient moisture inside the container to prevent it from going bad. You can buy these packs online, which are quite useful in many situations like this. 

These silica packs are similar to the packets you use to dry out damp clothes: the gel pack absorbs the moisture, helping everything that touches get dry quickly. Silica gel is a porous, absorbent material that’s commonly used in science experiments to absorb liquids, and phone users will be happy to know there’s a way to use this dry-aging technology to keep your phone charged.

Now all you need to do is get a container and put your phone in with the SIM card tray removed and any other removable parts, along with a couple of packets of silica gel. After this, seal the container, so it doesn’t absorb moisture from the air.

A silica gel pack could be your best friend in times like this.

Use a Desk lamp and or windowsill to dry your phone

If you still notice water under the phone screen or do not have access to silica gel packs or rice. Then, the only other thing you can try is to leave your phone by a window on a warm sunny day, or you can even use a desk lamp. These heat sources should eventually cause the eater or moisture trapped inside your phone to evaporate slowly.

However, this can take anywhere from a couple of days to almost a week, depending on how much water is trapped underneath your display. You also need to be careful about how much heat you’re exposing your phone to, as a lot of heat can damage the internal components of the phone.

Cleaning leftover watermarks on your phone

After your phone has had ample time to dry out, try turning it back on, and it should power on if there hasn’t been any damage to the internals. You might notice certain mineral deposits or water marks where the water was underneath the screen. These can be cleaned out using isopropyl alcohol. Using isopropyl alcohol is important as it will not leave any residue and absorb any lingering moisture; it does not conduct electricity and dries very fast. 

Despite seeming counterproductive, using isopropyl alcohol on the phone screen can be the solution as it does not conduct electricity. It will dry off any moisture and water when the phone is taken out to dry off.

Purchasing a new phone is a big investment, which is why you want to make sure it’s protected.

For more information, you can also read: Using Alcohol to fix or revive a Phone dropped in Water

Enjoy the clean screen of your phone

That’s it for this article, folks; now you know what to do if you have screen damage from water or if there’s water inside the phone’s screen. Most of the time, the solutions mentioned here should be enough to draw out any moisture from the phone. 

However, dunking your phone in rice after there’s been physical damage to the phone due to the water will not do anything. In such cases, you need to go to a service center to fix your phone. 

For the latest tips and tricks or to fix any issue with your android smartphone, click here.